When we carry out Home construction, we must make clear the spacing of shear wall screws, so as to ensure the safety and comfort of subsequent living. What is the spacing of shear wall formwork reinforcement split screws?

1、 What is the spacing between the tension screws in the reinforcement of the shear wall template

Normally, it should be between 400 and 600 millimeters, but in practice, it should also be judged based on the diameter of the water stop screw and the height of the shear wall used during construction. When using wooden and composite templates, shear wall screws are required, which are low-cost, affordable, and easy to obtain.

2、 What are the precautions for shear wall reinforcement construction

In order to ensure the smooth reinforcement of the shear wall project and reduce the probability of subsequent rework, we should also pay attention to various aspects during actual construction. The following are some precautions during construction.

1. Before construction, it is necessary to check the construction environment and understand the stress situation of the shear wall. If only based on the drawings, many problems will occur during construction. Therefore, it is necessary to understand the on-site conditions in advance.

2. After knowing the actual stress situation of the shear wall, it is necessary to choose the appropriate reinforcement method based on the specific problem. If the reinforcement method is not suitable, the corresponding reinforcement effect cannot be achieved, and it will also cause unnecessary waste.

3. During construction, it is necessary to strictly follow the corresponding regulations and take corresponding protective measures to reduce the probability of safety accidents during construction.

4. In order to ensure the quality of the project, it is necessary to contact a professional construction team to ensure the excellent technical level of workers and reduce the probability of quality problems.